Cudy FS1006P V3.0 6-Port 10/100Mbps PoE+ Switch

Expert Features Six-Port Fast Ethernet Layout : Four powered 10/100Mbps PoE+ ports handle cameras, access points, or compatible smart-building devices, while two dedicated Fast Ethernet uplinks connect the switch to a router, recorder, or core network. IEEE 802.3af/at PoE Support : Ports 1–4 deliver standards-based Mode A PoE, supporting compatible powered devices without separate local power adapters. 65W Total Power Supply : A practical PoE power budget for compact surveillance and smart-building installations without dragging a giant enterprise switch into the job. Up To 30W Per PoE Port : Each PoE port can provide up to 30W, subject to the switch’s total available power budget. 250-Meter Extend Mode : Ports 1–4 can reach up to 250 meters at 10Mbps using Cat.5e or better cabling when Extend Mode is enabled. VLAN Isolation Mode : VLAN Mode isolates PoE ports 1–4 from one another while preserving uplink communication, helping reduce unnecessary broadcast traffic and improve deployment security. Automatic PoE Watchdog : Under VLAN or Extend Mode, the switch attempts to reboot connected clients that remain inactive for five minutes. Intelligent Power Management : When the total PoE demand exceeds the available budget, the switch automatically disconnects the most recently powered device instead of crashing the complete network. Silent Operation : Ideal for offices, shops, control rooms, reception areas, and home-surveillance installations where noisy networking hardware is absolutely not invited. Metal Housing With Flexible Installation : The durable 200 × 118 × 44mm chassis supports desktop placement or wall mounting. Electrical Protection : Level 3 ESD and Level 4 surge protection help the switch survive electrically demanding networking environments. Clear Front-Panel Control : Dedicated Power and Link/ACT indicators plus a physical Default/Extend/VLAN DIP switch make deployment and troubleshooting fast and straightforward. Expert Specs Specification Value Brand Cudy Model Version FS1006P V3.0 Product Type 6-Port 10/100Mbps PoE+ Switch Total RJ45 Ports 6 × 10/100Mbps RJ45 PoE Ports Ports 1–4 Uplink Ports Ports 5–6 PoE Port Speed 10/100Mbps Uplink Port Speed 10/100Mbps PoE Mode Mode A PoE Standards IEEE 802.3af, IEEE 802.3at Maximum Power Per PoE Port 30W Total Power Supply 65W Maximum Power Excluding PoE 1W PoE Priority Intelligent power management automatically disconnects the most recently powered device when total demand exceeds the available budget Shielded RJ45 Port Not specified in the supplied information Extend Mode Ports Ports 1–4 VLAN Mode Ports Ports 1–4 Watchdog Availability VLAN Mode or Extend Mode Watchdog Behaviour Attempts to reboot connected clients that have remained inactive for five minutes Watchdog Configuration Note Disable automatic firmware-upgrade functions on connected client devices Physical Mode Control Default/Extend/VLAN DIP switch LED Indicators Power and Link/ACT for each Ethernet port Standard Distance At 10Mbps Up to 100m with Cat.3 or higher cable Standard Distance At 100Mbps Up to 100m with Cat.5 or higher cable Extended Distance Up to 250m at 10Mbps with Cat.5e or higher cable Extended-Distance Requirement Available only on Extend Mode ports while Extend Mode is enabled MAC Address Table 2,048 entries Maximum Switching Capacity 1.2Gbps Maximum Forwarding Rate 0.8928Mpps Jumbo Frame 2KB Packet Buffer 768Kbit Ethernet Protocols IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow Control PoE Protocols IEEE 802.3af, IEEE 802.3at PoE Management Intelligent Power Management Power Input Type AC inlet Power Method AC Power Input 100–240V AC, 50/60Hz Grounding Methods Three-prong plug and grounding point ESD Protection IEC/EN 61000-4-2, Level 3; contact discharge 6kV, air discharge 8kV Surge Protection IEC/EN 61000-4-5, Level 4; power DM 2kV, power CM 4kV, RJ45 CM 4kV Operating Temperature 0°C to 40°C / 32°F to 104°F Storage Temperature -40°C to 70°C / -40°F to 158°F Operating Humidity 10% to 90%, non-condensing Storage Humidity 10% to 95%, non-condensing Dimensions 200 × 118 × 44mm Dimensions In Inches 7.87 × 4.65 × 1.73in Product Weight 568.5g / 20.05oz Housing Material Metal Installation Desktop or wall-mount Operating Noise Silent operation Recommended Applications Surveillance and smart-building projects